View Issue Details

IDProjectCategoryView StatusLast Update
0000418FreeCADBugpublic2011-08-19 12:06
ReporterpperisinAssigned To 
PrioritynormalSeverityfeatureReproducibilityalways
Status closedResolutionfixed 
Product Versiontrunk 
Target VersionFixed in Version0.12 
Summary0000418: Sketcher - When pading I get unclosed shape
DescriptionHi,

This one is easy to reproduce

Place two arcs so that they have center at the same point - use coincidence on their center

Then place two lines so that the shape gets to be closed - use coincidence between lines and arcs

you can see the shape you get when you pad this



Additional Informationfreecad build 4725
win7 32bit
TagsNo tags attached.

Activities

2011-08-17 07:10

 

pad.png (Attachment missing)

wmayer

2011-08-17 09:10

administrator   ~0000980

Using arcs leads to an error somewhere in the model. Calling the check() method of the resulting solid shows the error message that a few faces are unorientable.
But e.g. with fix(0.0001,0.0001,0.0001) the solid is repaired and shows the missing faces.

pperisin

2011-08-17 13:02

reporter   ~0000983

I have tested other arcs, and the problem appears only if two arcs have coincidence constraint in centers.

other cases do not post this issue.

Regards
Petar

unauthenticated

2011-08-19 07:12

viewer   ~0000987

Here is an example which also fails with two not-coincident arc centers:
http://forum.freecadweb.org/viewtopic.php?f=8&t=1205&start=20

wmayer

2011-08-19 12:06

administrator   ~0000988

Fixed in r4771

Issue History

Date Modified Username Field Change
2011-08-17 07:10 pperisin New Issue
2011-08-17 07:10 pperisin File Added: pad.png
2011-08-17 09:10 wmayer Note Added: 0000980
2011-08-17 13:02 pperisin Note Added: 0000983
2011-08-19 07:12 unauthenticated Note Added: 0000987
2011-08-19 12:06 wmayer Note Added: 0000988
2011-08-19 12:06 wmayer Status new => closed
2011-08-19 12:06 wmayer Resolution open => fixed
2011-08-19 12:06 wmayer Fixed in Version => 0.12