View Issue Details
|ID||Project||Category||View Status||Date Submitted||Last Update|
|0003818||PartDesign||Feature||public||2019-02-05 11:03||2021-02-06 06:43|
|Summary||0003818: PartDesign Hole Depth Dimension should provide the option not to take the angled drill point type into account|
|Description||In the PartDesign Hole feature, the Depth Dimension option controls the overall depth of a blind hole. When the Drill point option is set to Angled, the dimension includes the conical end point generated by the Angled drill point option.|
There should be an option to set the depth dimension so that it does not include the conical end point, to comply with some standards.
|Tags||No tags attached.|
@LAROBERTE Did you mean Path Workbench ?
Have you opened a forum thread to discuss this ? (per our guidelines at the top of the page)
I do not speak English, it is very difficult for me to open and follow a discussion, I am obliged to translate everything, it is long and tedious.
I looked in the forum if someone was talking about it, but I did not find anything.
The problem is not a bug, but rather an error in the standards of rating, surely very easy to solve, that's why I intervened.
||@mlampert care to weigh in ?|
||I have never seen this dialog before - where does it come from?|
||@LAROBERTE please provide instructions on how to reproduce the bug|
I take care of it, but I do not work until Tuesday
thank you for considering my post.
Bug was wrongly reported in "FreeCAD (all projects)" instead of PartDesign.
Changed bug severity from major to minor.
I cannot reproduce the issue. For me, if I set the hole depth to 10mm with angled drill point, the 10mm value includes the drill point. Please provide your FreeCAD info as explained in the enormous yellow banner that you could not possibly miss.
I'm switching this report's status to feedback required.
OS: Ubuntu 18.04.2 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15816 (Git)
Build type: Release
Python version: 2.7.15rc1
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/Canada (fr_CA)
Okay, I think I understand the issue now. You actually want the hole depth NOT TO take the conical end into account.
This would be a feature request then, because in commercial software I use, both possibilities are offered (depth with or without the conical drill point).
hello, the downhole cone should never be included in the hole depth, it is only the consequence of the shape of the drill bit. The depth of a hole should take into account only the part with the correct diameter. see the two links of my first post.
if you want to add a feature, you should be able to choose the thread depth and drilling depth. Drilling and always deeper than the threading so as not to break the tools. the angle of the drilling cone is 120 degrees, the angle of the thread is 90 degrees. I do not have freecad until Tuesday, I promise you to make a correct post as soon as possible.
it's not very important for 3D printing, but it's very important for mechanical machining
I disagree. At work, plenty of time I really, really needed to define the total depth of a blind hole including the drill tip, so it would not punch through the material or would leave minimal thickness. Doing it your way would require guesswork or calculation.
As I said, Solid Edge (a commercial mid-range CAD package) offers both options. FreeCAD should do the same.
Your other arguments about thread depth and drilling depth are of course to the point. But the Hole feature cannot currently display a modelled thread, and the TechDraw workbench cannot extract hole information nor display it; so implementing this at this time would not really be useful. With 0.18 nearing release I doubt that we will see this implemented before release, which is why I set the target version to 0.19. Unfortunately, there is no longer a developer dedicated to the PartDesign workbench.
I agree with you, which is why my first post did not mention a request to add a function. I know that Freecad is evolving, but in the current state of things, the most important is the useful depth of the hole, which is the current standard in technical drawing. if you feel that the cone depth is half a diameter, you will have no problem and it is very easy with a 3D software to see if the cone of the bottom of the hole passes through.
Of course, if the drill cone is a problem, nothing prevents you from making a hole with a flat bottom with a suitable tool.
For years, technicians have been working to develop international standards for technical drawing.
If you want freecad to become one of the software that can also be used by professionals, you have to respect them.
The Hole function of freecad is for the moment only the draft, I am sure, of a practical and complete intuitive function. You can add as many functions as you want, but basic functions and their default values must comply with existing standards.
I am willing to participate on a forum to help develop Freecad, this particular function, but I opened this post only to correct this glaring error which will only cause the development of other functions or options for the materialization of the threads of freecad.
I'm not sure if the translation is understandable, I'm really sorry I do not write English directly.
I leave attached sketches that will be more meaningful than me.
OS: W10 lasted version or UBUNTU 18.10 with virtual box 5.2.26 r128414 (Qt5.6.2)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.15806 (Git) or 0.17
Build type: Release
2_56de1357158a5.pdf (2,497,939 bytes)
Hole depht.FCStd (27,467 bytes)
Thanks for the report. We are currently fixing all known hole dialog issues, see this forum thread: https://forum.freecadweb.org/viewtopic.php?p=453371#p453371
Should your requested option be the default or not?
||@LAROBERTE please reply|
> Should your requested option be the default or not?
I checked and asked colleagues, it is indeed the common rule not to take the drill angle into account. Here are some more documents stating the same as the French ones the bug reporter linked:
So I will add this option and make it default.
> So I will add this option and make it default.
Here is the PR: https://github.com/FreeCAD/FreeCAD/pull/4134
||Fixed: commit 7306ed28 ; PR https://github.com/FreeCAD/FreeCAD/pull/4134|
|2019-02-05 11:03||LAROBERTE||New Issue|
|2019-02-05 11:03||LAROBERTE||File Added: Capture_Hole.PNG|
|2019-02-06 03:00||Kunda1||Note Added: 0012585|
|2019-02-06 03:00||Kunda1||Status||new => feedback|
|2019-02-06 08:18||LAROBERTE||Note Added: 0012586|
|2019-02-06 08:18||LAROBERTE||Status||feedback => new|
|2019-02-08 21:48||Kunda1||Note Added: 0012592|
|2019-02-08 22:14||mlampert||Note Added: 0012593|
|2019-02-10 00:46||Kunda1||Note Added: 0012601|
|2019-02-10 00:47||Kunda1||Status||new => feedback|
|2019-02-10 05:16||LAROBERTE||Note Added: 0012602|
|2019-02-10 05:16||LAROBERTE||Status||feedback => new|
|2019-02-10 18:56||normandc||Summary||Function Hole Depth Dimension with Drill point type Angled => PartDesign Hole Depth Dimension does not take angled drill point type into account|
|2019-02-10 19:02||normandc||Severity||major => minor|
|2019-02-10 19:02||normandc||Status||new => feedback|
|2019-02-10 19:02||normandc||Note Added: 0012615|
|2019-02-10 19:03||normandc||Category||General => Bug|
|2019-02-10 19:05||normandc||Note Added: 0012616|
|2019-02-10 19:25||normandc||Status||feedback => acknowledged|
|2019-02-10 19:25||normandc||Category||Bug => Feature|
|2019-02-10 19:25||normandc||Target Version||=> 0.19|
|2019-02-10 19:25||normandc||Summary||PartDesign Hole Depth Dimension does not take angled drill point type into account => PartDesign Hole Depth Dimension should provide the option not to take the angled drill point type into account|
|2019-02-10 19:25||normandc||Description Updated||View Revisions|
|2019-02-10 22:41||LAROBERTE||Note Added: 0012617|
|2019-02-10 23:51||normandc||Note Added: 0012618|
|2019-02-11 01:13||LAROBERTE||Note Added: 0012619|
|2019-02-12 17:21||LAROBERTE||File Added: Capture vis.jpg|
|2019-02-12 17:21||LAROBERTE||File Added: 2_56de1357158a5.pdf|
|2019-02-12 17:21||LAROBERTE||File Added: Hole depht.FCStd|
|2019-02-12 17:21||LAROBERTE||Note Added: 0012630|
|2019-02-14 14:05||LAROBERTE||Note Added: 0012635|
|2020-12-01 13:29||uwestoehr||Assigned To||=> uwestoehr|
|2020-12-01 13:29||uwestoehr||Status||acknowledged => feedback|
|2020-12-01 13:29||uwestoehr||Note Added: 0015043|
|2020-12-03 18:40||Kunda1||Note Added: 0015057|
|2020-12-13 01:22||uwestoehr||Note Added: 0015133|
|2020-12-13 05:21||uwestoehr||Note Added: 0015134|
|2021-01-31 00:43||uwestoehr||Status||feedback => resolved|
|2021-01-31 00:43||uwestoehr||Resolution||open => fixed|
|2021-01-31 00:43||uwestoehr||Fixed in Version||=> 0.19|
|2021-01-31 00:43||uwestoehr||Note Added: 0015230|
|2021-02-06 06:43||abdullah||Target Version||=> 0.20|