View Issue Details

IDProjectCategoryView StatusLast Update
0002812Path[FreeCAD] Featurepublic2017-11-28 00:40
ReportersliptonicAssigned To 
PrioritynormalSeverityfeatureReproducibilityhave not tried
Status newResolutionopen 
Product Version 
Target Version[FreeCAD] 0.18Fixed in Version 
Summary0002812: Dressup to remap gcode based on probe data.
DescriptionA touchprobe can be used to scan a surface and generate a series of points corresponding to the Z depth.

An existing path can then be re-processed with a dressup to map the gcode to the approximated surface.
Two pieces need to be written:
Capture probe data:
A FreeCAD feature should be written to generate the probe file. It would take as input:
1) A selected path. From this it would get the boundbox and determine the XY limits.
2) #points in X
3) #points in Y.
4) distance to probe in Z.
5) name for the probe results file.

From this, a gcode file would be generated to probe the grid and write results to a file.

Reprocess a path using probe data
A dressup should be written to take as input a probe file and then map the path to the probed surface data by adjusting the Z depth of each move appropriately using bilinear interpolation.
Additional Information

This feature is implemented in gcode ripper.
TagsNo tags attached.



2017-11-28 00:39

developer   ~0010484

moving feature request to 0.18 target

Issue History

Date Modified Username Field Change
2016-12-05 21:47 sliptonic New Issue
2017-11-28 00:39 sliptonic Product Version 0.17 =>
2017-11-28 00:39 sliptonic Target Version 0.17 => 0.18
2017-11-28 00:39 sliptonic Note Added: 0010484
2017-11-28 00:40 sliptonic Severity minor => feature